Exemption From Specified Requirements of the Transport (Vehicle Standards) Regulations 1990 Pursuant to regulation 36 of the Transport (Vehicle Standards) Regulations 1990, I, Martyn Jacob de Liefde, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Transport (Vehicle Standards) Regulations 1990 listed in Schedule 2, subject to the conditions specified in Schedule 3. Schedule 1 Vehicle Details Make: Chevrolet Model: Camaro 2 Door Year of Manufacture: 1968 Chassis No.: 124378L341303 Schedule 2 Exempted requirements relating to: Regulation 20 (2): Direction-indicator lamps Regulation 29 (1) (a) & (c), (3), (4): Seat belts Schedule 3 Conditions i) The items specified in Schedule 2 (except for seat belts and seat belt anchorages) must be within the vehicle manufacturer's specifications; ii) The items specified in Schedule 2 must be in sound condition and good working order; iii) (a) Two-point lap seat belts that comply with the appropriate vehicle standard are fitted in the front outboard sitting positions; [sp'iii) '](b) Two-point lap seat belts that comply with the appropriate vehicle standard are fitted in the rear outboard sitting positions; [sp'iii) '](c) All other sitting positions are fitted with the seat belts required by regulation 29; iv) All seat belts must be securely anchored to the vehicle and seat belt anchorages that are not the vehicle manufacturer's original equipment must comply with Specification St 120395; v) This exemption may be revoked at any time; vi) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection. Signed at Christchurch this 10th day of September 1997. M. J. de LIEFDE, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 23 December 1996.