Exemption From Specified Requirements of the Transport (Vehicle Standards) Regulations 1990 Pursuant to regulation 36 of the Transport (Vehicle Standards) Regulations 1990, I, Peter Waring, Senior Vehicle Policy Engineer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Transport (Vehicle Standards) Regulations 1990 listed in Schedule 2, subject to the conditions specified in Schedule 3. Schedule 1 Vehicle Details Make: MG Model: B GT Year of Manufacture: 1972 Chassis No.: GHD5-288486G Schedule 2 Exempted Requirements Regulation 13 (8): Brakes Regulation 22 (2): Registration-plate illumination lamps Regulation 27 (exemption covers only compliance with appropriate vehicle standard): Windscreen wiping and washing Regulation 28 (2): Rear-vision mirrors Regulation 29 (1) (c), (3), (4): Seat belts Regulation 30 (2): Seat belt anchorages Regulation 32 (3): Door locks and hinges Regulation 33 (3): Steering Regulation 34 (1), (3): Interior fittings Schedule 3 Conditions (i) The items specified in Schedule 2 (except for seat belts and seat belt anchorages) must be the vehicle manufacturer's original equipment; (ii) The items specified in Schedule 2 must be in good condition and must not be modified in any way; (iii) Static 3-point lap and diagonal seat belts are fitted in the front seating positions and 2- point lap seat belts are fitted in the rear seating positions; (iv) All seat belts must be securely anchored to the vehicle and seat belt anchorages that are not the vehicle manufacturer's original equipment must comply with Specification St 120395; (v) This exemption may be revoked at any time; (vi) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection. Signed at Wellington this 24th day of June 1997. PETER WARING, Senior Vehicle Policy Engineer, acting under the authority delegated to me by way of instrument of delegation dated 23 December 1996.