Pursuant to section 141G of the Hazardous Substances and New Organisms Act 1996, notice is given that the material incorporated by reference into Regulations is as follows:
The Hazardous Substances (Compressed Gases) Regulations 2004 incorporate the following material
ISO/IEC 17011:2004 Conformity assessment-General requirements for accreditation bodies accrediting conformity assessment bodies
ISO/IEC Guide 65 General Requirements for bodies Operating Product Certification Systems
17th revised edition of the UN Recommendations on the Transport of Dangerous Goods-Model Regulations (2011)
AS/NZS 1841.1-AS/NZS 1841.8 Parts 1 to 8 of the standard on Portable Fire Extinguishers
AS/NZS 2299.1:2007 Occupational diving operations-Standard operational practice
AS 3635 Unified (ISO inch) screw threads, associated gauges, and gauging practice
ANSI/CSA/CGA Standard V1 Compressed Gas Cylinder Valve Outlet and Inlet Connections
DIN EN ISO 11363-1 Gas cylinders-17E and 25E taper threads for connection of valves to gas cylinders-Part 1: Specifications
AS 2473.1-2006 Valves for compressed gas cylinders-Specifications, type testing, and manufacturing tests and inspections
AS 2473.2-2007 Valves for compressed gas cylinders-Outlet connections (threaded) and stem (inlet) threads
AS 2278.1-2008 Aerosol containers-Metal aerosol dispensers of capacity 50 mL to 1000 mL inclusive
UL 125-2009 Standard for Safety Flow Control Valves for Anhydrous Ammonia and LP-Gas
UL 2061 Standard on Adapters and Cylinder Connection Devices for Portable LP-Gas Cylinder Assemblies
BS 1552 Specification for open bottomed taper plug valves for 1st, 2nd, and 3rd family gases up to
BS 341.1 1991 British standard on Transportable gas container valves. Specifications for industrial valves
BS 341.2 1963 British standard on Transportable gas container valves. Valves with taper stems
BS 341.3 2002 British standard on Transportable gas container valves. Valve outlet connections
BS 341.4 1963 British standard on Transportable gas container valves. Pressure relief devices
AS 2473.3-2007 Valves for compressed gas cylinders-Outlet connections for medical gases (including pin-indexed yoke connections)
AS 2472 means the Australian standard on Valves for medical gas cylinders (Including pin-indexed outlet)
AS 2030.1-2009 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases. Part 1: Cylinders for compressed gases other than acetylene
AS 2030.2-2009 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases. Part 2: Cylinders for dissolved acetylene
AS 2030.5-2009 Gas cylinders-Filling, inspection and testing of refillable cylinders
AS 4267 Pressure regulators for use with industrial compressed gas cylinders
AS 3840.1-1998 Pressure regulators for use with medical gases-Pressure regulators and pressure regulators with flow-metering devices
AS 4621-2004 Regulators for use with liquefied petroleum-Vapour phase
UL 252 Standard on Compressed Gas Regulators
CGA V-1 (2005) Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connections published in November 2005
UL 144-2009 Standard for LP-Gas Regulators
UL 2227 Standard on Overfilling Prevention Devices
UK LP Gas Association Code of Practice No. 15 Part 1:1992
AS 2337.1-2004 Gas cylinder test stations-General requirements, inspection and tests-Gas cylinders
AS 2337.3-2006 Gas cylinder test stations-Transportable gas cylinders- Periodic inspection and testing of composite gas cylinders
All the material incorporated by reference is available for inspection free of charge, week days between 9.00am and 5.00pm, at the Ministry for the Environment's head office at:
23 Kate Sheppard Place
To make an appointment to inspect the incorporated material please contact the Ministry for the Environment on:
Telephone: (04) 439 7537.
Photocopying of incorporated material will not be permitted.
Purchase of Material
Material may be purchased directly from:
Standards New Zealand
8 Gilmer Terrace
By post: Private Bag 2439, Wellington 6140.
Website (for online purchases): www.standards.co.nz
Telephone (for ordering by freephone): 0800 782 632.
Email (for ordering by email):
Materials may be ordered from Standards New Zealand by using a telephone available free of charge at the Ministry offices listed above.
Dated this 23rd day of September 2013.
CRAIG MALLETT, Manager, Environmental Risk and Innovation, Ministry for the Environment (acting under delegated authority).