Applications Advertised for Objection
Closing Date for Objections 9th March 2004

1 Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection should do so in writing, to the Ministry of Economic Development, PO Box 1473, Wellington, Fax 0-4-474-2843 indicated by the reference number, before 9th March 2004. All submissions should include:
- the Tariff Industry Assistance (Advertisement) Notice number; the Tariff item; and
- Reference number.
2 All submissions from local manufacturers should include:
- the range of alternative goods made locally;
- the grounds on which objection is made (including reasons why the local product is a suitable alternative);
- present and potential output;
- details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.
3 Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the Ministry of Economic Development quoting the details in paragraph 1 above.

Part Appn. *Category
Tariff Name and Address II Ref. of
Item Description of Goods of Applicant Ref. No. Appn.

2106.90.99 Breast milk fortifier, 2.1g sachet Nutricia Ltd 99 999963K A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Cubison tube feed Nutricia Ltd 99 999964H A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Cubitan 200ml Nutricia Ltd 99 999969J A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Diasip, 200ml, sip feed Nutricia Ltd 99 999971L A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Diason tube feed liquid Nutricia Ltd 99 999967B A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Forticreme 125g Nutricia Ltd 99 999965F A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Fortini multi-fibre, 200ml Nutricia Ltd 99 999966D A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Glycerd trierucate/glycerol trioleate/lorenzo's oil Nutricia Ltd 99 999962A A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Infatrini, tube feed liquid Nutricia Ltd 99 999970B A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Loprofin cereal Nutricia Ltd 99 999961C A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Loprofin drink mix Nutricia Ltd 99 999960E A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Metabolic mineral mix 250g Nutrucia Ltd 99 999959A A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Nutilis Nutricia Ltd 99 999974E A
PO Box 62523
Central Park
AUCKLAND


Tariff Industry Assistance (Advertisement) Notice No. 2004/06 - continued

Part Appn. *Category
Tariff Name and Address II Ref. of
Item Description of Goods of Applicant Ref. No. Appn.

2106.90.99 Nutrison, protein plus multi fibre tube feed liquid, lL Nutricia Ltd 99 999973G A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Pre-Op, 200ml Nutricia Ltd 99 999968L A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Scandishake Nutricia Ltd 99 999958C A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 Stimulance multi-fibre mix, 400g Nutricia Ltd 99 999972J A
PO Box 62523
Central Park
AUCKLAND

2106.90.99 XLYS, low try maxamaid Nutricia Ltd 99 999957E A
PO Box 62523
Central Park
AUCKLAND

3923.90.12) Paint pails and disposable liners White Cliffs Agencies 99 999986J A
3923.90.18) 1 Almond Grove
3924.90.09) Greenhithe
3926.90.69) AUCKLAND 1311

5107.10.00 Merino wool yarn of: Destex Co NZ 99 999978H IM
2/56nm of 17 to 22 microns - 40,000kgs C/- Mondiale Freight Services
2/36nm of 17 to 22 microns - 40,000kgs PO Box 53004
2/28nm of 17 to 22 microns - 12,000kgs AUCKLAND AIRPORT
1/36nm of 17 to 22 microns - 90,000kgs
1/60nm of 17 to 22 microns - 40,000kgs
2/72nm of 17 to 22 microns - 50,000kgs
1/48nm of 17 to 22 microns - 25,000kgs
1/72nm of 17 to 22 microns - 10,000kgs
2/80nm of 17 to 22 microns - 10,000kgs
2/90nm of 17 to 22 microns - 10,000kgs
1/80nm of 17 to 22 microns - 10,000kgs

60.01) 1. Ref: Kwong Fat 100% polyester - 300 metres Import Management Ltd 99 999980K IM
60.02) 2. Ref: Kai Hing 100% polyester - 220 metres PO Box 1167
60.03) 3. Ref: Fu Fung 100% polyester - 60 metres AUCKLAND
60.04) 4. Ref: Zephyr 78% acrylic, 14% wool, 8% spandex - 1000 metres
60.05) 5. Ref: 7510 48% nylon, 46% rayon, 6% spandex - 750 metres
60.06) 6. Ref: 5445 100% polyester - 750 metres
7. Ref: Isle 69% acrylic, 31% polyester - 500 metres
8. Ref: Casino 95% polyester, 5% spandex - 500 metres
9. Ref: Gateau 100% polyester - 250 metres
10. Ref: Starlette 93% viscose, 7% elastane - 500 metres
11. Ref: SJ19386 60% nylon, 40% metallic - 5000 metres
12. Ref: WH352 90% acrylic, 10% polyester - 2500 metres
13. Ref: VSL 95% viscose, 5% spandex (lycra) - 1000 metres
14. Ref: Chess 45% nylon, 40% rayon, 5% spandex - 500 metres
15. Ref: SJ19530 61% polyester, 34% rayon, 5% spandex - 5000 metres
16. Ref: SJ14365 75% polyester, 20% rayon, 5% spandex - 12,000 metres

60.01) 1. Ref: YSH1088 100% lyocell (tencel) - 20,000 metres Import Management Ltd 99 999979F IM
60.02) 2. Ref : 12396/32020 100% nylon - 10,000 metres PO Box 1167
60.03) 3. Ref: BS-3385 100% tencel - 20,000 metres AUCKLAND
60.04) 4. Ref: SH217-B 100% polyester - 8000 metres
60.05) 5. Ref: CB-K925165 42% acrylic, 23% wool, 33% nylon, 2% spandex - 5000 metres
60.06) 6. Ref: CB-K925184 90% polyester, 10% spandex - 2000 metres
7. Ref: CB-K926181 75% cotton, 25% polyester - 3000 metres
8. Ref: PF12ART12 100% cotton - 2000 metres
9. Ref: K31104 90% polyester, 10% spandex - 2000 metres
10. Ref: ITY-K234 90% polyester, 10% spandex - 2000 metres
11. Ref: NEO2067C 100% rayon - 10,000 metres
12. Ref: NT2663 92% acetate, 8% spandex - 20,000 metres
13. Ref: NTM-100 94% polyester, 6% spandex - 20,000 metres
14. Ref: TOP-02-3938 100% cotton - 20,000 metres
15. Ref: Bilbo 52% acetate, 43% wool - 1000 metres
16. Ref: V24-31-L 80% linen, 20% rayon - 1500 metres

6006.10.19 Knitted fabric, 100% wool - 1000m2 Zambesi Workroom Ltd 99 999985L IM
113 Wellesley Street West
AUCKLAND


Tariff Industry Assistance (Advertisement) Notice No. 2004/06 - continued

Part Appn. *Category
Tariff Name and Address II Ref. Of
Item Description of Goods of Applicant Ref. No. Appn.

7010.90.38 330ml clear glass bottles, quantity 9.2 million Sutton Group 99 999981H IM
PO Box 10123
Dominion Road
AUCKLAND

8415.82.10 Air conditioners of a kind designed for control cabinet cooling, not HPS Technologies Ltd 99 999984B A
exceeding 2.6kW cooling capacity PO Box 28286
Remuera
AUCKLAND

84.59) CURRENT APPROVAL:
84.60) Machine-tools for working metal or metal carbides, not being machines 99 993927L V
84.61) falling within heading No. 84.67 or 84.68:
84.62) EXCLUDING:
84.63) (1) Bandsaws, (other than automatically controlled bandsaws), with a maximum
cutting capacity in the horizontal, 45o or 90o positions as follows:
Cutting at 90o, round bar capacity up to 260mm diameter
Cutting at 90o, flat bar up to 430mm wide x 260mm high
Cutting at 45o, round bar capacity up to 260mm diameter
Cutting at 45o, flat bar up to 280mm wide x 260mm high
(2) Box and plan folders, hand operated
(3) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width
(4) Chain saw sharpeners
(5) Drill presses, bench or floor mounting column type, belt driven, excluding types with power feed to drilling quill
(6) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel.
(7) Dualfoam hydraulic press with facility to cast its own tools, models 5E, 6, 7, 8 and 9
(8) Machinery, (other than numerically controlled machine tools), peculiar for use in making and
repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity;
swaging, 19mm-76mm
expanding, 25mm-76mm;
bending, 19mm-76mm;
forming bends of 60mm-140mm radii
(9) Metal circular saws hand operated with high speed steel blades not exceeding 250mm
(10) Metalworking guillotines and shears, excluding the following:
762mm power operated guillotines especially suited for use in the photo-processing and engraving trade for
cutting zinc, magnesium and copper sheets
Reinforced steel bar cropping machines, with capacity exceeding 20mm
Types with a straight cutting edge of 105mm or less
(11) Metal hacksaws, (other than automatically controlled hacksaws), with a rated
square material cutting capacity of which any one measurement is 280mm or less
(12) Plate rolls (other than those having a top roll diameter of 255mm and lower roll diameter of 215mm)
(13) Press brakes (including coil cradle straighteners)
(14) Presses, hydraulic
(15) Presses, mechanical, power operated and other, not exceeding 35 tonnes capacity
(16) Punch, crop and rivet presses, not exceeding 3.05 tonnes capacity
(17) Rod reinforcing steel cutters, not exceeding 20mm mild steel capacity
(18) Roll forming machines, including continuous spouting and continuous ridging machines
(19) Shearing, punching and notching machines, hand and hydraulically operated
(20) Sheet metal folding machines
(21) Sheet metal rollers, hand operated, not exceeding 1220mm x 76.2mm x 1.6mm capacity
(22) Swaging and crimping machines
(23) Metal cutting bandsaws in vertical positions with a maximum cutting throat depth up to 450mm
N.B. Any multi-purpose or composite machines incorporating any of the functions above are
excluded from this concession

84.59) REQUESTED APPROVAL:
84.60) Machine-tools for working metal or metal carbides, not being machines 99 999982F V
84.61) falling within heading No. 84.67 or 84.68:
84.62) EXCLUDING:
84.63) (1) Bandsaws, (other than automatically controlled bandsaws), with a maximum
cutting capacity in the horizontal, 45o or 90o positions as follows:
cutting at 90o, round bar capacity up to 260mm diameter
cutting at 90o, flat bar up to 430mm wide x 260mm high
cutting at 45o, round bar capacity up to 260mm diameter
cutting at 45o, flat bar up to 280mm wide x 260mm high
(2) Box and plan folders, hand operated
(3) Buffing and contact grinding machines, not exceeding 304.8mm wheel diameter and 508mm belt width
(4) Chain saw sharpeners
(5) Drill presses, bench or floor mounting column type, belt driven, excluding types with power feed to drilling quill
(6) Drill presses, wall mounting, radial type not exceeding 22.22 capacity in mild steel.
(7) Dualfoam hydraulic press with facility to cast its own tools, models 5E, 6, 7, 8 and 9
(8) Machinery, (other than numerically controlled machine tools), peculiar for use in making and
repairing exhaust systems and other products made from metal tubing, not exceeding the following capacity;
swaging, 19mm-76mm
expanding, 25mm-76mm;
bending, 19mm-76mm;
forming bends of 60mm-140mm radii
(9) Metal circular saws hand operated with high speed steel blades not exceeding 250mm
(10) Metalworking guillotines and shears, excluding the following:
762mm power operated guillotines especially suited for use in the photo-processing and engraving trade for
cutting zinc, magnesium and copper sheets
reinforced steel bar cropping machines, with capacity exceeding 20mm

Tariff Industry Assistance (Advertisement) Notice No. 2004/06 - continued

Part Appn. *Category
Tariff Name and Address II Ref. of
Item Description of Goods of Applicant Ref. No. Appn.

types with a straight cutting edge of 105mm or less
(11) Metal hacksaws, (other than automatically controlled hacksaws), with a rated
square material cutting capacity of which any one measurement is 280mm or less
+
(13) Press brakes (including coil cradle straighteners)
(14) Presses, hydraulic
(15) Presses, mechanical, power operated and other, not exceeding 35 tonnes capacity
(16) Punch, crop and rivet presses, not exceeding 3.05 tonnes capacity
(17) Rod reinforcing steel cutters, not exceeding 20mm mild steel capacity
(18) Roll forming machines, including continuous spouting and continuous ridging machines
(19) Shearing, punching and notching machines, hand and hydraulically operated
(20) Sheet metal folding machines
(21) Sheet metal rollers, hand operated, not exceeding 1220mm x 76.2mm x 1.6mm capacity
(22) Swaging and crimping machines
(23) Metal cutting bandsaws in vertical positions with a maximum cutting throat depth up to 450mm
N.B. Any multi-purpose or composite machines incorporating any of the functions above are
excluded from this concession

8479.10.00 Automatic tank flushing and cleaning system Mason Engineers 99 999987G A
C/- PO Box 59220
Mangere Bridge
AUCKLAND

9010.10.00 Photo labs capable of processing both index and digital prints, and parts KMart NZ Ltd 99 999983D A
and accessories thereof C/- UTI NZ Ltd
PO Box 53012
AUCKLAND AIRPORT


* Category of Application: A - General Approval
CE - Capital Equipment
IM - Inputs to Manufacturing - Inability to Supply
MS - Manufacturers' Samples
RUC - Revocation of Unused Concession
S - Shortfall
SS - Special Situation
V - Variation of Existing Concession
W - Withdrawal of Concession
+ - Denotes amendment or addition


Dated at Wellington this 12th day of February 2004. V.A. MANKS, Ministry of Economic Development.