Notice Type
Departmental
Notice Title

RADIOCOMMUNICATIONS (EMC STANDARDS) NOTICE 2003


Pursuant to regulation 32(1)(a), (b), (c), (d) and (j) of the Radiocommunications Regulations 2001, the Chief Executive, Ministry of Economic Development, hereby gives the following notice.

NOTICE
1. Title, commencement and purpose
(a) This notice is the Radiocommunications (EMC Standards) Notice 2003.
(b) This notice comes into force on 1 May 2003.
(c) This notice prescribes:
(i) classes of electrical and electronic products, being interfering equipment as defined in section 2(1) of the Radiocommunications Act 1989.
(ii) the standards applicable to particular classes of products.
(iii) the level of conformity applicable to a class of product.
(iv) products that are exempt from the need to be the subject of a declaration of conformity.
2. Interpretation
(a) In this notice, unless the context otherwise requires:
"battery powered", in relation to a product, means a product that is not capable of being connected, either directly or indirectly, to the electrical mains supply.
"code of practice" means a publication prescribing the procedures and processes relating to any of the following:
(i) the installation and maintenance of products.
(ii) the interconnection of products.
(iii) the networking of products.
(iv) the assembling of components, modules and sub-assemblies to form a finished product.
"electromagnetic compatibility", also known as EMC, means the ability of products to satisfactorily function as intended in their electromagnetic environment, without introducing intolerable electromagnetic disturbances into that environment.
"fixed installation" means a combination of parts, components, modules, or products assembled and installed at a place of use in such a way that the combination cannot be moved without being at least partially disassembled, including electric power lines and wired telecommunication distribution networks, but not including telecommunications terminal equipment designed for installation in customer premises.
(b) For the purposes of the tables of this notice:
"AS/NZS" means a joint Australian/New Zealand standard under the terms of the Active Co-operation Agreement between Standards Australia International Limited and Standards New Zealand.
"CFR" means the Code of Federal Regulations of the United States of America.
"CISPR" means a publication published by the Special Committee on Radio Interference of the International Electrotechnical Commission.
"COP" means a code of practice prescribed in this notice.
"EN" means a standard published by the European Committee for Electrotechnical Standardisation, commonly known as CENELEC.
"ETS" and "ETS EN" means a standard published by the European Telecommunications Standards Institute, commonly known as ETSI.
"IEC" means a publication published by the International Electrotechnical Commission.
"RFS" means a standard or specification published by the Chief Executive of the Ministry of Economic Development.
(c) Other words and expressions contained in this notice that are defined in the Act, regulations and notices made under the regulations, have the meanings so defined.
3. Scope
(a) Every product that is interfering equipment, except a radio transmitter, is subject to the provisions of this notice.
(b) The following products are exempt from the requirement to be the subject of a declaration of conformity and to be labelled:
(i) those with a power consumption not exceeding 6 nano-watts.
(ii) a spare part intended for use in replacing parts of a product.
(iii) a vehicle that is registered under Part 1 of the Transport (Vehicle Registration and Licensing) Act 1986, or capable of being registered, for use on a public road.
(iv) military equipment or weapons systems of the New Zealand Defence Force.
(v) military equipment or weapons systems of the defence force of another country operating in co-operation with the New Zealand Defence Force.
4. Applicable standards
(a) For the purposes of regulation 32(1)(a), (b), (c) and (d), the applicable standards and levels of conformity apply to specified classes of product as provided in the tables to this notice.
(b) Unless expressly stated to the contrary in this notice:
(i) an amendment or modification to an applicable standard is effective from the date specified by the authority issuing the amendment or modification.
(ii) a product that is first supplied 2 years or more after the effective date of an amendment or modification to an applicable standard, must conform to that amended or modified applicable standard.
5. Conformity requirements
(a) If a product is in a class to which a standard as prescribed in tables 1 to 6 applies, that standard is an applicable standard, and the product must conform to the requirements of that applicable standard, as amended by the provisions of table 7 of this notice.
(b) The supplier of a product to which subsection (a) applies must comply with the level of conformity requirements applying to that product as prescribed in the Radiocommunications (Compliance) Notice 2003, or a notice in replacement thereof.
(c) If more than one standard prescribed in tables 1 to 6 applies to a product, the applicable standard is the standard most closely related to the primary purpose, use or application of the product.
(d) Only those requirements of a standard relating to electromagnetic radiations, or inductions apply for the purposes of this notice.
6. Products to which level of conformity 1 requirements apply
If a product is not a product to which level of conformity 2 or level of conformity 3 applies, the supplier of the product must meet the requirements of level of conformity 1. Products to which level of conformity 1 applies include those that are, or incorporate:
(a) manually operated switches or simple relays.
(b) brushless squirrel cage induction motors.
(c) wire-wound, mains frequency transformers.
(d) rectifier diodes.
(e) resistive heating elements.
7. Products to which level of conformity 2 requirements apply
(a) Except as provided in subsection (b), if a product is, or incorporates, any of the following, the supplier of the product must meet the requirements of level of conformity 2. The products are:
(i) a microprocessor or other clocked digital device.
(ii) a radio frequency oscillator.
(iii) a commutator or slip-ring motor.
(iv) arc welding equipment.
(v) a lighting ballast.
(vi) electronic devices operating in a switching or non-linear mode such as switched-mode power supplies, lighting dimmers, electronic transformers, and motor speed controllers.
(b) If a product to which subsection (a) applies is any of the following, then the product is exempt from the requirement to be labelled. The products are those that are:
(i) supplied in a total quantity of no more than 10 per annum.
(ii) battery powered.
(iii) a prototype for demonstration purposes.
(iv) a fixed installation, including telecommunications network equipment (TNE).
(c) If a product is Group 1 industrial, scientific and medical (ISM) equipment, as defined in AS/NZS 2064:
(i) the supplier of the product must meet the requirements of level of conformity 2; and
(ii) the product must comply with the provisions of Table 6 in regard to the frequencies of operation.
8. Products to which level of conformity 3 requirements apply
(a) If a product is Group 2 industrial, scientific and medical (ISM) equipment, as defined in AS/NZS 2064:
(i) the supplier of the product must meet the requirements of level of conformity 3; and
(ii) the product must comply with the provisions of Table 6 in regard to the frequencies of operation.
(b) If a product is telecommunications terminal equipment (TTE) designed for installation in customer premises, the supplier must meet the requirements of level of conformity 3.

TABLE 1 - Australian and New Zealand Standards (AS/NZS, AS, NZS) Standards

AS/NZS 1044 AS/NZS 1053 AS/NZS 2064 AS/NZS 2344 AS/NZS 2557 AS/NZS 3548 AS/NZS 3652 AS/NZS 4051 AS/NZS 4251.1 AS/NZS 4251.2 AS 62040.2 Household appliances, electric tools and similar equipment Broadcast receivers and associated equipment ISM radio frequency equipment Overhead a.c. powerlines and high voltage equipment installations Vehicles, motorboats, and spark-ignited engine-driven equipment Information technology equipment Arc welding equipment Electrical lighting and similar equipment EMC generic emission standard - residential, commercial and light industry EMC generic emission standard - industrial environments Uninterruptible power systems (UPS)

TABLE 2 - Special Committee On Radio Interference (CISPR) Standards

CISPR 11 CISPR 12 CISPR 13 CISPR 14-1 CISPR 15 CISPR 22 ISM radio frequency equipment Vehicles, motorboats, and spark-ignited engine-driven equipment Broadcast receivers and associated equipment Household appliances, electric tools and similar equipment Electrical lighting and similar equipment Information technology equipment

TABLE 3 - International Electrotechnical Commission (IEC) Standards

IEC 60204-31 IEC 60439-1 IEC 60669-2-1 IEC 60669-2-2 IEC 60669-2-3 IEC 60687 IEC 60730-1 IEC 60730-2-5 IEC 60730-2-6 IEC 60730-2-7 IEC 60730-2-8 IEC 60730-2-9 IEC 60730-2-11 IEC 60730-2-13 IEC 60730-2-14 IEC 60730-2-18 IEC 60870-2-1 IEC 60945 IEC 60947-1 IEC 60947-2 IEC 60947-3 IEC 60947-4-1 IEC 60947-4-2 IEC 60947-4-3 IEC 60947-5-1 IEC 60947-5-2 IEC 60947-5-3 IEC 60947-5-6 IEC 60947-6-1 IEC 60947-6-2 IEC 61000-3-8 IEC 61000-6-3 IEC 61000-6-4 IEC 61008-1 IEC 61036 IEC 61037 IEC 61038 IEC 61268 IEC 61326 IEC 61543 IEC 61800-3 IEC 61812-1 IEC 62040-2 Sewing machines, units and systems Low voltage switch gear and control gear assemblies Electronic switches Remote control switches (RCS) Time-delay switches (TDS) Alternating current static watt-hour meters for active energy - classes 0,2,S and 0,5,S Automatic electrical controls for household and similar use Automatic electrical burner control systems Automatic electrical pressure sensing controls Timers and time switches Electrically operated water valves Temperature sensing controls Energy regulators Humidity sensing controls Electric actuators Automatic electrical water and air flow sensing controls Telecontrol equipment and systems Maritime navigation and radiocommunication equipment and systems Low voltage switch gear and control gear Circuit breakers Switches, disconnectors, switch-disconnectors and fuse-combination units Electromechanical contactors and motor-starters AC semiconductor motor controllers and starters AC semiconductor controllers and contactors for non-motor loads Electromagnetic control circuit devices Proximity switches Proximity devices and defined behaviour under fault conditions (PDF) DC interface for proximity sensors and switching amplifiers (NAMUR) Automatic transfer switching equipment Control and protective switching devices (or equipment) (CPS) Signalling on low voltage electrical installations EMC generic emission standard - residential, commercial and light industry EMC generic emission standard - industrial environments Residual current operated circuit breakers for household and similar uses (RCCB) Alternating current static watt-hour meters for active energy - classes 1 and 2 Electricity metering - tariff and load control - electronic ripple control receivers Electricity metering - tariff and load controls - time switches Alternating current static var-hour meters for reactive energy - classes 2 and 3 Electrical equipment for measurement, control and laboratory use Residual current operated protective devices (RCD) for household and similar use Adjustable speed electrical power drive Specified time relays for industrial use Uninterruptible power systems (UPS)

TABLE 4 - European Norm (EN) Standards

EN 50065-1 EN 50081-1 EN 50081-2 EN 50091-2 EN 50148 EN 50199 EN 50227 EN 50263 EN 50270 EN 55011 EN 55013 EN 55014-1 EN 55015 EN 55022 EN 55103-1 EN 60204-31 EN 60439-1 EN 60669-2-1 EN 60669-2-2 EN 60669-2-3 EN 60687 EN 60730-1 EN 60730-2-5 EN 60730-2-6 EN 60730-2-7 EN 60730-2-8 EN 60730-2-9 EN 60730-2-11 EN 60730-2-13 EN 60730-2-14 EN 60730-2-18 EN 60870-2-1 EN 60945 EN 60947-1 EN 60947-2 EN 60947-3 EN 60947-4-1 EN 60947-4-2 EN 60947-4-3 EN 60947-5-1 EN 60947-5-2 EN 60947-5-3 EN 60947-5-6 EN 60947-6-1 EN 60947-6-2 EN 61008-1 EN 61036 EN 61037 EN 61038 EN 61268 EN 61326 EN 61543 EN 61800-3 EN 61812-1 Signalling on low-voltage electrical installations in the range 3 kHz to 148,5 kHz EMC generic emission standard - residential, commercial and light industry EMC generic emission standard - industrial environments Uninterruptible power systems (UPS) Electronic taximeters Arc welding equipment Control circuit devices and switching elements proximity sensors Relays and protection equipment Equipment for detection and measurement of combustible, toxic gases or oxygen ISM radio frequency equipment Broadcast receivers and associated equipment Household appliances, electric tools and similar apparatus Electrical lighting and similar equipment Information technology equipment Audio, video and entertainment lighting control apparatus for professional use Sewing machines, units and systems Low voltage switchgear and controlgear assemblies Switches for household and similar fixed-electrical installations - electronic switches EM remote control switches (RCS) Time delay switches (TDS) Alternating current static watt-hour meters for active energy (classes 0,2,S and 0,5,S) Automatic electrical controls for household and similar use Automatic electrical burner control systems Automatic electrical pressure sensing controls Timers and time switches Electrically operated water valves, including mechanical requirements Temperature sensing controls Energy regulators Humidity sensing controls Electric actuators Automatic electrical water and air flow sensing controls Telecontrol equipment and systems Maritime navigation and radiocommunication equipment and systems Low voltage switchgear and controlgear - general rules Circuit breakers Switches, disconnectors, switch-disconnectors and fuse-combination units Electromechanical contactors and motor starters AC semiconductor motor controllers and starters AC semiconductor controllers and contactors for non-motor loads Electromechanical control circuit devices Proximity switches Proximity devices with defined behaviour under fault conditions (PDF) DC interface for proximity sensors and switching amplifiers (NAMUR) Multiple function equipment - automatic transfer switching equipment Control and protective switching devices (or equipment) (CPS) Residual current operated circuit (RCCB) Alternating current static watt-hour meters for active energy (classes 1 and 2) Electricity metering - tariff and load control - electronic ripple control receivers Time switches for tariff and load control Alternating current static var-hour meters for reactive energy (classes 2 and 3) Electrical equipment for measurement, control and laboratory use Residual current operated protective devices (RCD) for household and similar use Adjustable speed electrical power drive systems Specified time relays for industrial use


TABLE 5 - Codes of Practice

COP 001 Personal computer assemblies

TABLE 6 - ISM Frequencies

Characteristic Frequency Frequency Range
13.56 MHz 13.553 - 13.567 MHz
27.12 MHz 26.957 - 27.283 MHz
35.7 MHz 35.4 - 36 MHz
40.68 MHz 40.66 - 40.7 MHz
433.92 MHz 433.05 - 434.79 MHz
925 MHz 921 - 929 MHz
2.45 GHz 2.4 - 2.5 GHz
5.8 GHz 5.725 - 5.875 GHz
24.125 GHz 24 - 24.25 GHz
61.25 GHz 61 - 61.5 GHz
122.5 GHz 122 - 123 GHz
245 GHz 244 - 246 GHz

Table 7 - Variations to Standards

Standard Provisions
AS/NZS 1044 Subclauses 7.2.1 and 8.4 do not apply
EN 55014 Subclauses 7.2.1 and 8.4 do not apply
CISPR 14 Subclauses 7.2.1 and 8.4 do not apply
AS/NZS 3548 Subclause 4.2 does not apply to the extent that a warning is not required to be included in the instructions for use.
EN 55022 Subclause 4.2 does not apply to the extent that a warning is not required to be included in the instructions for use.
CISPR 22 Subclause 4.2 does not apply to the extent that a warning is not required to be included in the instructions for use.

Dated at Wellington this Thursday, the 17th day of April 2003.
SANJAI RAJ,
Manager Business Services, Radio Spectrum Management,
Ministry of Economic Development.
Explanatory Note
This note is not part of the notice, but is intended to indicate its general effect. This notice prescribes:
(a) classes of products, being interfering equipment and susceptible equipment as defined in section 2(1) of the Radiocommunications Act 1989; and
(b) the standards applicable to particular classes of products; and
(c) the level of conformity applicable to a class of product; and
(d) products that are exempt from the need to be the subject of a declaration of conformity.